Download/criu

Schedule

See release schedule.

v. 1.5

Tarball:	criu-1.5.tar.bz2
Version:	1.5
Released:	2 Mar 2015
GIT tag:	v1.5

New features

• CRIT tool
• Ability to request CPU compatibility on instructions level only
• C/R of empty AIO rings
• More detailed errno report via RPC
• Per-feature "criu check"
• Inheriting FDs on restore
• Ability to automatically move veth device to host-side bridge on netns restore
• VT terminals support
• More user namespaces C/R stuff
  • Sockets full support
  • Invisible files
  • TTYs
  • FSnotifies

Optimizations

• TCP send queue is restored in the maximal portions allowed by the kernel
• Pre-loading sock-diag modules now happens in a more elegant way

Fixes

• Multi-threaded tasks on 64bit ARM could segfault upon restore
• When doing "check" CRIU could leave un-killed piggie task
• The --cpu-cap option argument was parsed with errors
• Incorrect handling of --cpu-cap fpu compatibility mode on restore
• Criu ignored trailing CLI arguments that resulted in usage confusions
• Irmap hints didn't include common "/" path
• When run per user request, CRIU left log and pid files belonging to root
• Mappings on AUFS could be looked up on wrong mount point
• Fixed compilation on Centos6.5
• Wrong /proc was used when reading the list of FDs to close on restore
• Race in restoring TCP established and listening sockets results in failed bind() on the latter
• Legacy ttys errorneously treated as unix98
• TTY pairs slavery setup could pick wrong peer
• For user-dump the log and pid files still belonged to root
• Task could die while being frozen thus causing dump to fail or save wrong task state
• Failures in mount points validation and sharing resolving didn't abort the dump (error arose on restore)

v. 1.5.1

Tarball:	criu-1.5.1.tar.bz2
Version:	1.5.1
Released:	31 Mar 2015
GIT tag:	v1.5.1

New features

• Inheriting FDs now work in "swrk" RPC mode
• Restored pid is reported in post-restore RPC notification

Fixes

• Uninitialized ss in sigframe causes C/R failures on 4.0 kernel
• Cgroups' properties are initialized too late on restore
• Cgroups' destruction isn't performed in non detached mode
• Cgroups' destruction can fail on error paths

v. 1.4

Tarball:	criu-1.4.tar.bz2
Version:	1.4
Released:	1 Dec 2014
GIT tag:	v1.4

New features

• Dump and check cpuinfo. Needed to make sure CPU is capable to run the images after restore, e.g. during live migration
• Initial support for user namespaces
  • Use memfd to restore shared memory segments
  • New (slightly faster) API for mm stuff restore via prctl
  • [UG]ID-s are dumped from parasite, not from /proc files
• The docker_cr.sh script to show how Docker container C/R should (will) look like
• New API for writing plugins (old one is still possible)
• Service workers change their title to better look in ps output
• Ability to feed socket for pre-dump and page-server in swrk mode
• Page-server can auto-bind its port
• Ability to perform several actions during one connection to RPC service
• C/R of opened /proc/$pid/foo files of dead tasks
• C/R of /dev/console
• C/R of virtualized devtmpfs (openvz and future upstream kernels)
• C/R of empty mqueue fs (posix message queues)
• C/R of shared bind-mounts

Optimizations

• BFD engine
  • Faster that glibc's FILE * buffered read from /proc files
  • Buffered image files IO
• Faster parasite/restorer unload
  • Use HW breakpoints
  • Less ptrace GETREGS calls sometimes
  • Wake pie after sending the FINI command to socket
• Merged some pairs of images into one
  • eventpoll and -tfd
  • inotify and -wd
  • fsnotify and -mark
• Less setns()-s on dump is much faster on older kernels
• Faster access to /proc/self files -- cached fd of /proc/self and openat(this_cache)

Fixes

• Sibling restore mode didn't set up CRIU signals properly
• Unpredictable sibling/child root task restore. Fixed with explicit CLI option
• Validation for leaf mount points was skipped
• Mount options were corrupted on dump, which resulted in errors bind mounts detection
• Uninitialized properties of some cgroups prevented moving tasks into them (e.g. empty cpuset masks and low memcg limit)
• File locks could belong to task with different pid (inherited on fork) blocked the dump
• Bogus error printed in logs about SIGCHLD catch (was caused by thread dump using traps)
• Irmap engine accessed freed root_task on pre-dump
• Restore of net namespace could always fail (pid mismatch on fork) if kernel thread was created on netns setup
• Cgroups service descriptor was closed too early and failed restore
• Auto-loaded *diag modules caused audit netlink socket to contain data on dump (dump fails in this case)
• The "(deleted)" prefix accumulated in unlinked files while doing C/R
• The devpts filesystem and ptmx file were only dumped when found on /dev/pts and /dev respectively
• Data in netlink socket and fanotify was lost after C/R (now dump is aborted if data found in it)
• Fanotify mark was restore in different mount namespace
• Images were writable by group. Not secure when user-dump was requested
• Rootfs has parent id equal to self. CRIU didn't expect this and failed the dump
• Shared mount of the --root path failed the restore
• Absence (e.g. not compiled in) of any namespace in the kernel failed the dump
• Page-server incremental dump didn't detect new tasks properly and failed the stage
• Big TCP queues sometimes failed to get restored
• Incremental pre-dump could lose track of memory changes by task

v. 1.3

Tarball:	criu-1.3.tar.bz2
Version:	1.3
Released:	1 Sep 2014
GIT tag:	v1.3

New features

• TimerFD support
• VVAR area (newer kernels' part of VDSO) support
• CGroups hierarchies support
• AUFS support (for Docker)
• PDeathSig support
• Check for opened file's size on dump and restore is the same
• Ability to restore tasks as children using libcriu (criu_restore_child)
• Add pkgconfig file for libcriu
• CRTOOLS_IMAGE_DIR variable available in action scripts

Optimizations

• Merged images with pending signal into core
• Per-task images with file locks are merged into one big image
• Smaller tasks orchestration memory area on restore
• Sigactions are inherited on restore when possible, not overwritten
• ZDTM suite now executes tests in parallel

Fixes

• Dump failed if robust lists were off
• Link remaps on tmpfs mounts were not dumped
• Non root tasks with custom groups couldn't dump its peers (Security)
• Opened and unlinked FIFOs, dirs and devices were restored as regular files
• Files opened from alien mount namespace were restored in the local one
• Link remap name sometimes was generated with error
• Opened and removed cwd couldn't be restored
• Sysctl kernel.msgmni was overwritten by subsequent auto_msgmni
• Library and RPC APIs didn't match the CLI one
• Some external mounts were constantly "postponed" and never got mounted
• The self.mm_dumpable prlctl value of 2 caused restore to fail
• Errors when writing sysctls with tail \n
• The criu show printed nested repeated fields corrupted
• Dump stats were initialized with garbage
• Restore sometimes stuck on waiting for inet socket port bind
• Spurious SIGHUP when restoring slave ttys
• Restore wasn't aborted if sub-task failed early

v. 1.3.1

Tarball:	criu-1.3.1.tar.bz2
Version:	1.3.1
Released:	12 Sep 2014
GIT tag:	v1.3.1

Fixes

• Sibling restore mode didn't set up CRIU signals properly
• Unpredictable sibling/child root task restore. Fixed with explicit CLI option
• Validation for leaf mount points was skipped
• Mount options were corrupted on dump, which resulted in errors bind mounts detection

v. 1.3-rc2

Tarball:	criu-1.3-rc2.tar.bz2
Version:	1.3-rc2
Released:	18 Jun 2014
GIT tag:	v1.3-rc2

New features

• Native (w/o plugins) c/r of external bind mounts
• C/R of the info in which cgroups tasks live
• C/R of task's dumpable flag
• Dump pstore, securityfs, fusectl and debugfs mountpoints

Fixes

• VDSO was searched on stack's guard page
• Mount namespace w/o /proc mount blocked the restore
• Several misses in searching for COW VMA resulted in sub-optimal pages sharing on restore
• FIFO-s path was restored in wrong mount namespace
• Mountpoint fsnotify could be restored on a bind-mount
• One tmpfs mounted several times was dumped several times
• Bind-mount's root path of the top mount was calculated with error
• Fix device number calculation out of major:minor on some distros
• Devpts mount options got lost on dump
• Page-pipes grew endlessly resulting in dump failures on big VMAs
• IO and PF mappings were tried to be dumped
• Two merged MAP_GROWSDOWN VMAs got dumped with overlapping guard page
• Too small shared area was used to fetch tasks mappings that resulted in failed dump of huge mappings
• Many fixes in build system
• Zdtm's COW test sometimes ignored COW failures

v. 1.3-rc1

Tarball:	criu-1.3-rc1.tar.bz2
Version:	1.3-rc1
Released:	25 Apr 2014
GIT tag:	v1.3-rc1

New features

• AArch64
• Multiple mount namespaces
• FPU state restore control
  • Restore old FPU state on newer CPUs
  • Ability to ignore FPU restoration
• Support stopped multi-threaded tasks
• CRIU now can execv() other binary right after restore is complete
• Inode-reverse mapping can be enforced to allow live-migration with FS copying
• Gold linker can now be used to compile CRIU
• "Berserker" test to check CRIU scalability
• Punch pages from mem images on restore (optimizes live-migration)

Optimizations

• Batched deduplication of memory images
• Packed rlimits into core image
• Packed timers into core image

Fixes

• Bad checks for kcmp() ret codes resulted in errors in file sharing detection
• Multiple mmaps of same files with different flags blocked the restore
• Integer overflow in huge mapping restore caused restoration failure
• devpts's newinstance option was lost during dump
• Subsequent dump could try to find old mem dump for newly forked task
• Bad detection of overmounted mountpoints on fsnotify restore
• Page-server could read partial message and failed
• Errors in dumping of two subsequent anon VMAs in some cases
• Irmap mis-compared devices for disk FSs
• TMPFS handles always change during dump/restore
• Pre-dump sometimes hangs on FIFOs
• Post-restore script fails too late (if does it)

v. 1.2

Tarball:	criu-1.2.tar.bz2
Version:	1.2
Released:	26 Feb 2014
GIT tag:	v1.2

New features

• Performance improvements
  • Shared entries in reg-files image
  • Less accesses to /proc/$pid/map_files links
  • Cache for /proc/$pid/pagemap reads
  • VDSO page is seeked only in anonymous mappings
  • Task's auxv is read in one call
  • Merged mm and vma image files for better packing
  • NFS inodes' path resolution (for fsnotify) cache
  • One readlink() call when checking anon inodes
  • Don't dump kernel's zero-page
  • Parse fast /proc/self/maps when searching for hole for restorer
  • A bit faster write into image files with writev()
• Library versioning
• RPC API got closer to CLI
  • Suitable for live migration project
  • Action-scripts via RPC notification messages
• New "post-restore" call in action scripts
• Logrotate rules file
• Default log file for service when starting via systemd

Fixes

• A lot for ARM cross-compile
• Fsnotifies dumping didn't work on NFS
• Images auto-deduplication only worked one level up
• Packet socket ID was treated as file-descriptor and close()-d
• Badly counted pages stats on restore
• Linked remap name conflict when dump and restore on NFS
• Sporadic failures in memory draining due to huge pipes used
• Broken criu show of repeated fields
• Failure to open mountpoint in foreign pid namespace
• Unlinked bound unix socket dump error
• Small memory leak when writing to incremental image(s)
• Restoring fsnotify for links results in ELOOP
• Host's PATH is not suitable when execv-ing tar/ip/iptable to restore namespace (workaround, proper fix will be in 1.3)
• Using subdirs in log file name via RPC breaks security

v. 1.1

Tarball:	criu-1.1.tar.bz2
Version:	1.1
Released:	28 Jan 2014
GIT tag:	v1.1

Fixes

• Errors from memory dumping are not handled resulting in corrupted dumps
• EOF detection in stacked images is done with error
• Stacked images don't work on non-shared FS (missing pagemap-s)

v. 1.1-rc2

Tarball:	criu-1.1-rc2.tar.bz2
Version:	1.1-rc2
Released:	20 Jan 2014
GIT tag:	v1.1-rc2

Fixes

• Crash in criu check
• RPC check always fail on 3.11 kernel
• Failed fork() didn't abort restore
• Dump fail not reported via RPC
• RPC client disconnect wasn't handled
• Page server could connect to self for writing images
• Hang on pre-dumping task livig in net-namespace
• VDSO page mis-handle on pre-dump
• FPU state loss on pre-dump
• Memory tracking turns ON w/o request
• Various fixes (and improvements) in build system

v. 1.1-rc1

Tarball:	criu-1.1-rc1.tar.bz2
Version:	1.1-rc1
Released:	30 Dec 2013
GIT tag:	v1.1-rc1

New features

• libcriu.so -- wrapper library for RPC clients
• Plugins
  • External unix sockets
  • External bind mounts
  • External net devices
  • Unknown file types
• Images deduplication in incremental dumps
• Integration with systemd
• Filtering of criu show output

Note: The API defined in the first two items above may change after -rc1

Fixes

• Errors in unlinked files/sockets detection on BTRFS
• NFS silly-rename files are not treated as unlinked
• Freezer fail to seize quickly forking/pthread_create-ing tasks
• Extra stop signal queued for stopped tasks after pre-dump
• Wrong dying task state detection
• Lost RPC dump response
• Crash when reporting restore error via RPC
• Negative return code into shell
• Tasks left in wrong states after failed dump
• A little bit more verbose check action
• Coverity checks fail here and there

v. 1.0

Tarball:	criu-1.0.tar.bz2
Version:	1.0
Released:	25 Nov 2013
GIT tag:	v1.0

Fixes

• After --leave-running linked remaps were not cleaned
• TCP was left locked after --leave-running
• Weak criteria in memory COW detection
• Private mapping's premmapped address overwrote file ID
• Restorer memory could overlap with timers/signals arrays
• RPC worker reused options from service task
• Suboptimal memory utilization by restorer arguments
• TCP unsent/unacked data boundary was lost
• Wrong dev_t decoding on 64 bit
• Unpredictable daemons (service and page-service) working dir
• Parasite stack could be corrupted by its arguments
• Error from exe link restore was ignored
• Artificial small limit on the number of shared memory segments to restore
• Bug in ARM VFP restore
• VDSO proxy was unmapped at the very end of restore

New features

• -W option to specify working dir
• CHECK request in RPC
• Optimized headers
• More info in logs about undumpable files
• More comments about tricky dump/restore places
• Generic memory allocation for restorer

v. 0.8

Tarball:	criu-0.8.tar.bz2
Version:	0.8
Released:	18 Oct 2013
GIT tag:	v0.8

New features

• RPC service
• Ability to work from non-root user (via +s bit)
• Handle stopped tasks
• Restore tasks' root path
• Dump and restore net ns iptables configuration (w/o conntracks)
• Support for external net devices in netns (e.g. openvz venet)
• Support CORK and NODELAY TCP options
• SEQPACKET unix sockets support

Fixes and improvements

• Unload restorer blob after restore
• Fixes and enhancements in criu show
• Fix in unsorted inotify wd restoring
• Fixed trimmed messages in parasite transport
• Fine-grained pgrps restore
• Fix in large TCP buffers restore
• Fixed buffer overflow in IPC ns dumping
• Fix in early page server connection close on pre-dump
• Fixed race in handling aborted parasite blob
• Fixed lost unmapped criu vmas in restore
• Fixes in parsing devices in /proc/pid/maps and /proc/locks
• Fixed snd/rcv buf sockoptions restore
• Enhanced logging in parasite

v. 0.7

Tarball:	criu-0.7.tar.bz2
Version:	0.7
Released:	3 Sep 2013
GIT tag:	v0.7

New features

• TUN devices support (requires patched kernel)
• Alternative stack (sigaltstack) C/R
• Shared and master/slave mounts support
• Restore statistics
• Net device address C/R
• Safer and simpler asynchronous parasite
• Fixes in
  • Stack guard page dump/restore
  • Page server communications
  • COW mappings restore
  • Zombies restore
  • Aborting failed restore
  • TCP connection restore (some require patched kernel)
  • Semi-closed Unix sockets with data dump/restore
  • etc.

v. 0.6

Tarball:	criu-0.6.tar.bz2
Version:	0.6
Released:	1 Jul 2013
GIT tag:	v0.6

New features

• Cross-compiling support
• Ready to accept images from OpenVZ RHEL6-based kernel
  • VDSO conversion
• Posix CPU timers C/R
• Asynchronous parasite
  • Self-heal dumpee in case of crtools crash
• Memory changes tracking (requires patched kernel)
  • Incremental backups
  • Pre-dump task command for smaller freeze time
• Dump statistics
• Return-arg for remote syscalls execution
• Improved "show" output
• Opened /proc/PID/ns/* files C/R
• Daemon mode for page-server
• Build-time features test (makes it possible to build on different distros)

v. 0.5

Tarball:	criu-0.5.tar.bz2
Version:	0.5
Released:	30 Apr 2013
GIT tag:	v0.5

New features

• C/R netlink sockets
• C/R pending signals
• New format for memory dumps
• Incremental dumps (preliminary)
• Ability to directly send memory dumps on remote host (for faster live migration)
• Images showing enhancements
• Kernel features checking enhancements
• Lots of BUGs fixed
• Renamed crtools to criu (both binary and source package names)

v. 0.4

crtools-0.4.tar.bz2
Released: 20 Feb 2013
GIT tag: v0.4

New features

• ARM port
• Remote syscall execution
• C/R of
  • FPU state
  • File locks (basic support)
  • Rlimits
  • FANotify descriptors
  • Shared fdtable (table of file descriptors)
  • Tasks' umask
  • Pipe buffer size
  • Unix sockets' credentials
  • TCP time-stamp offset (allows to migrate a TCP socket, requires custom kernel)
• Automatic namespaces detection (--namespace option is deprecated)

Internal

• Build system rework
• Dumping/restoring memory pointers standardized (while doing ARM port)
• Ability to collect coverage (gcov, reported here)
• 32/64-bit problems mostly resolved (while doing ARM port)

v. 0.3

crtools-0.3.tar.bz2
Released: 11 Dec 2012
GIT tag: v0.3

New features

• C/R of shell jobs
• Handle files, that are opened and unlinked, but some other hard link exists
• More SOL_SOCKET socket options. Two most interesting are:
  • Binding socket to device (SO_BINDTODEVICE)
  • Per-socket packet filter (SO_ATTACH_FILTER)
• Shutdown state of a socket
• Task scheduler parameters (nice, policy and prio)
• Properly handle COW pages
• Memory mapped packet sockets (with SOL- options this is enough for tcpdump tool support)
• Complementary groups (getgroups(2))
• Various mapping features, configured with madvise(2)
• Tune TCP sockets support to work with IPv6 sockets
• Closed (or not yet connected/bound) unix sockets

Bug fixes and improvements

• Print timestamps in log files
• Restructure source tree a little
  • PIE stuff in separate dir
  • Arch-specific code in arch/<Arch>/ directory
• Nicer show -c output for pages/pipes/etc contents
• Fixes in help text
• Save and restore blocked signals mask for threads
• Don't dump (and warn about it) corked UDP sockets
• Fixed livelocks when restoring too big socket queues
• Refresh info about sockets, that might have changed between diag dump and actual process freeze
• Lost file params and socket options for some unix sockets
• Fix inotify on opened and unlinked files
• Fix shared anonymous memory detection
• Properly close all files before restoring them
• Fixes in running external tools (ip/tar)
• Several fixes in control tty restoring code
• RT signals handlers dumped and restored

v. 0.2

crtools-0.2.tar.bz2
Released: 20 Sep 2012
GIT tag: v0.2

v. 0.1

crtools-0.1.tar.bz2
Released: 23 Jul 2012
GIT tag: v0.1